General

Air Duster/Blow Gun Air Inlet: 1/4"M BSP Standard nozzle: Ø2.0mm Working pressure: 0-10Bar/0-150PSI Air dusters and blow guns are tools used to remove dust, debris, and moisture from various surfaces and equipment. They work by utilizing compressed air to create a forceful stream of air that dislodges particles and dries surfaces. Application: To be used with compressed air For dust removal from work pieces/work areas General machine & power tool cleaning..

Air Duster/Blow GunLong Nozzle Air Inlet: 1/4"M BSP Standard nozzle: Ø2.0mm Additional nozzle: 95mm x 4.0mm diameter Working pressure: 0-10Bar/0-150PSI Air dusters and blow guns are tools used to remove dust, debris, and moisture from various surfaces and equipment. They work by utilizing compressed air to create a forceful stream of air that dislodges particles and dries surfaces. Application: To be used with compressed air For dust removal from work pie..

Air Duster/Blow GunLong Nozzle Air Inlet: 1/4"M BSP Nozzle diameter: 4.0mm Nozzle length: 260mm Working pressure: 0-10Bar/0-150PSI Air dusters and blow guns are tools used to remove dust, debris, and moisture from various surfaces and equipment. They work by utilizing compressed air to create a forceful stream of air that dislodges particles and dries surfaces. Application: To be used with compressed air For dust removal from work pieces/work areas Gene..

Mini Air Duster/Blow Gun Air Inlet: 1/4"M BSP Air consumption rate: 6 CFM (170l/min) Output increase rate: 12CFM (340/min) Working pressure: 0-10Bar/0-150PSI Connector Type: ARO Air dusters and blow guns are tools used to remove dust, debris, and moisture from various surfaces and equipment. They work by utilizing compressed air to create a forceful stream of air that dislodges particles and dries surfaces. Application: To be used with compressed air Fo..

Tyre chuck for Ø8mm ID hose The tyre chuck fits on a tyre inflator to hold onto a tyre's valve while inflating it. Replacement tyre chuck for SG STG05....

Heavy duty tyre chuck The heavy duty dual head tyre chuck is fitted with a rubber grip and is ideal to inflate tyres in hard to reach places. Hose tail for Ø 8mm ID hose....

Tyre chuck 1/4 BSP The tyre chuck needs to be pressed onto a tyre's valve to inflate it. Combine the tyre chuck with a hose tail fitting, fitted to a hose to inflate a tyre.....

Tyre inflator with pressure gauge The tyre chuck on the pressure gauge conveniently holds the valve in place while inflating the tyre. A button can be pressed on the inflator gun to deflate the tyre in the pressure is too high. Working pressure: 0-10 Bar....

Paraffin wash gun Designed to connect to a compressor and to be fill with detergents, non-corrosive cleaning agents or degreasants to clean an engine, rims or hand tools around the workshop. The wash gun works by allowing you to get into hard to reach areas to remove grease and grime at the same time. Cup capacity: 750 ml Working pressure: 0-10 Bar Air inlet: 1/4 BSP....

WASH / PARAFFIN GUN BLISTER PACK....

SAND BLAST SAND 150 GRIT ALUM OXIDE 1KG....